*Warning: StoveTopper® is not to be used as a cooking surface.

Be certain all burners are "OFF" when StoveTopper® is in place on top of stove.

For gas stoves, it is recommended that the StoveTopper® only be used on models with electronic ignition (starters).

Use with pilot light-type stoves is not recommended.

Customer is responsible for accurate measurements. 
Please call us at 937-324-7510 or 937-631-9285 after hours if you need any clarifications on measuring. 
Please see our 
Return Policy.

How to Measure for your Stovetopper®

Traditional Oven / Stove / Range


NOTES:


If your measurements are less than 29.5 x 22, the topper will sit flatinside  the ridges. 

Depth: Measure top of stove from Front to Back (as shown in the picture below).
Take measurements inside the ridges. ​​

If measuring for a stove, cooktop or range with grates, please measure the height of your burner grates.

Sizes available:

1 inch

2 inch

​2.5 inch


View Cart

If you prefer the topper sit inside the ridge (outer ledge of stove), please measure True-to-Size. 



If you prefer the topper sit flush next to countertop, please add 1/4 inch to each side of width.

If your stove's measurements are not listed below in our available sizes, please contact us for a custom size StoveTopper®.

Electric StoveTopper

Gas StoveTopper

​​​​​Products on site show the width is listed before the depth. (W x D)


Width: Measure top of stove from Left to Right (as shown in the picture below). 

Take measurements inside the ridges. 


If you have rounded corners, measure from the non-rounded starting point of corner.